Kaprooster met klep

With the Culinorm hood grille with non-return valve you have the right solution for exhaust air to the outside. The Culinorm Hood grille has a non-return valve that opens on overpressure and prevents opposing airflow and water from entering the tube.

The Culinorm hood grille with non-return valve stainless steel suitable for your situation?

The square Hood grille with non-return valve – stainless steel has a nice design with a sloping hood for exhausting air, the shutter helps to avoid an opposing airflow and is resistant to water ingress. The shutter opens at overpressure. As a result, this ventilation grille is only suitable for extracting air in combination with mechanical ventilation or an extractor hood.

The connection pipe diameter of the Culinorm wall grille

Stainless steel overpressure hood grille, made of stainless steel 304 with a matt brushed surface. The overpressure grille is provided with a connection pipe for air ducts with a diameter of 150, 125 or 100 mm. The connection tube of the Culinorm hood grille with non-return valve – stainless steel is itself 5 mm smaller and has leaf springs that point outwards, this is so that it easily fits into a tube of the correct diameter but is still firmly fixed in it.

The Culinorm hood grille with non-return valve – stainless steel fasteners and fixings.

This facade grille is equipped with a beautiful stainless steel windshield that protects the exhaust against wind and rain. The mounting materials are included, consisting of four screws and a rubber sealing ring. No plugs are included because it depends on the wall which plugs are suitable. If the wall is reasonably level, you can use the rubber sealing ring. If your wall is not level and the rubber sealing ring cannot create a neat seal, it is recommended to use a sealant to create a seal between your wall and the Culinorm hood grille with non-return valve – stainless steel